Features

- Limiter on each input (adjustable). Release, attack & threshold are set via presets

- Insert point on inputs

- Direct output from each Mic/Line input module

- Three-band equalizer with a choice of four center frequencies in the MF section

- Transformer balanced inputs and outputs (main and auxiliary)

- Two main outputs and two auxiliaries

- Limiter on L & R outputs. Can be linked for stereo operation

- M-S stereo facilities in main and monitor signal paths

- Comprehensive monitor selection

- Two monitor outputs for headphones or speaker amplifiers

- Two communication outputs and one return

- Selection of monitor feeds to communication outputs

- Remote start facility

- Ten pin multiway connectors for output and returns

- Six pin multiway connector for outputs and returns, buffered for use with DAT

- Fifteen way D connector for feeding equipment such as a meter bridge (AD096)

- A pair of meters - either PPM or VU - may be switched to read various outputs or follow the monitor

- Internal oscillator, 1kHz & 10kHz, selectable to L-R and/or auxiliary outputs. Interrupted tone is optional on the left path

- All connectors are presented on one surface of the case and in line with the corresponding module

REFERENCE 0db=775mV at 1kHz unless otherwise stated

MAX GAIN MIC 80dB

LINE 45dB

MAX INPUT LEVEL MIC @ MAX GAIN -42dB @ MIN GAIN 0dB

LINE @ MAX GAIN -7dB @ MIN GAIN +24dB

STEREO-RETURNS +18dB

INSERT RETURN +18dB

EXT 1 RETURN +18dB

INPUT IMPEDANCE MIC >1k5R

LINE >10kR

STEREO-RETURNS >50kR

INSERT RETURN >10kR

EXT 1 RETURN >100kR

MIC POWERING 48V PHANTOM & 12V TONADER

MAX OUTPUT +24dBm (600R LOAD) L-R TRANSFORMER BAL

+24dBm (600R LOAD) AUX 1&2

TRANSFORMER BAL

+18dBm (600R LOAD) MONITOR 1&2 UNBALANCED

+18dBm (600R LOAD) EXTERNAL 1&2 UNBALANCED

+18dBm (600R LOAD) INSERT SEND UNBALANCED

+18dBm (600R LOAD) CLEAN FEED UNBALANCED

OUTPUT IMPEDANCE <60R L-R and AUX 1&2

<20R MONITOR 1&2

<20R EXTERNAL 1

<20R INSERT SEND

<20R CLEAN FEED

FREQUENCY 0: -1dB 20Hz to 20kHzL-R and AUX 1&2

RESPONSE 0: -1.5dB 20Hz to 20kHz MONITOR 1 & 2

HARMONIC DISTORTION <0.05% @ 1kH 0dB OUTPUT

<0.3% @ 40Hz to 20kH +15dB OUTPUT

OVERLOAD INDICATOR ILLUMINATES @ +15dB at the

PRE-FADER POINT

CROSSTALK < -70dB 40Hz to15kHz

INTERCHANNEL & INTERGROUP

NOISE MIC <-126dB EIN 20Hz to 20kHz SOURCE 200R (with respect to the input)

LINE >70dB SNR 20Hz to 20kHz

EQUALISATION HF: 110dB @ 10kHzVARIABLE SLOPE

115dB MAX @ 15kHz

LF: 110dB @ 100Hz VARIABLE TURNOVER

115dB MAX @ 30Hz

MF: 115dB PEAK & DIP RECIPROCAL Q=1.2

CENTRE FREQ = 118dB @ 1k4Hz

MF1 = 118dB @ 1k8Hz

MF2 = 118dB @ 2k3Hz

MF1 + MF2 = 118dB @ 3k8Hz

HPF 1: PRE-TRANSFORMER 12dB/OCTAVE

-3dB @ 150Hz

HPF 2: -3dB @ 90Hz 12dB/OCTAVE

HPF 1+ HPF 2 : REFER TO CURVES

OUTPUT LIMITER THRESHOLD +8dB

RATIO 7 : 1

ATTACK -2 SETTINGS INTERNALLY SWITCHABLE

1 : 4ms 2 : 0.8ms

RELEASE 2 SETTINGS

INTERNALLY SWITCHABLE

1 : 250ms 2 : 80ms

MIC/LINE LIMITER THRESHOLD +0dB

RATIO 7 : 1

ATTACK COUNTER- CLOCKWISE 0.5ms

CLOCKWISE 10ms

CENTRE 4ms

RELEASE COUNTER- CLOCKWISE 10ms

CLOCKWISE 700ms

CENTRE 300ms

FACTORY SETTINGS FOR ATTACK AND RELEASE TIMES:

OUTPUT LIMITER: SLOW

MIC/LINE LIMITER: CENTRE

CURRENT CONSUMPTION 8 INPUT 370mA

click here for System pdf

click here for Output pdf

click here for Mic Line pdf

click here for Monitor Type 1 pdf

click here for Monitor Type 2 pdf